Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

Willworx Superstand Stand Connector
$13.95
- Allows two SuperStands to be connected together in an unlimited number of configurations to suit every bicycle shop layout, size and area
White Lightning Clean Streak
$9.79 - $19.95
- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors
Wald 585 Rear Grocery Basket
$16.95
The Wald 585 rear basket sits atop your bicycle's rear rack. Perfect for hauling full-sized grocery bags, small laptop bags, spare clothes, or maybe even storing your helmet while parked. - 14 x 9 x 9 inches - Fits on rear rack of bicycles - Sturdy steel construction - Made in the USA
Wald Wald Training Wheels 1216
$34.95
Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.
VeloPress Rocket Fuel
$23.95
In ROCKET FUEL, James Beard Award-winner Matt Kadey, RD, offers up innovative, delicious, and convenient real-food recipes to power everyday exercise and weekend adventures. Kadey's ingenious recipes include whole food snacks like pudding, muffins, bars, slushies, pancakes, bites, wraps, cakes, cups, and more. Whole foods are a healthier, tastier performance fuel than highly processed sports food products. With over 100 recipes in ROCKET FUEL, it's easier than ever to power up for workouts, recharge during halftime, or stay energized on the trail.
Tubus Stay Clamp Set for Cargo/Logo
$12.95 - $13.00
Tubus strut clamp set for attaching and adjusting front stays on Cargo and Logo rear racks. - Aluminum block with stainless steel hardware - Fits 8mm diameter stays
Tri-Flow Superior Lube
$5.99 - $127.10
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
Topeak FlashStand
$59.95
Topeak's FlashStand is a super work/display stand that folds up to become extremely portable as well! This affordable two-footed wonder supports your bike at the bottom bracket and down tube and raises the rear wheel with two adjustable-height feet. Take it along in the trunk of your car to dial-in your ride before your next adventure!
Topeak MTX 2.0 Explorer
$52.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity
Topeak MTX 2.0 Explorer 29er
$65.95
- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g
Topeak VersaCage
$35.95
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
Tifosi Optics Dolomite 2.0 Clarion
$79.95
Tifosi's Dolomite 2.0 Clarion glasses sport goggle-like, wrap-around frames and well-vented lenses for fog-free vision. These sturdy, lightweight shades boast Tifosi's exceptionally tough Grilamid frames and include three sets of easily interchangeable lenses, so you can see clearly in any light condition. The included Clarion mirrored lenses are hydrophobic to repel sweat and water spots. Equipped with large, impact-resistant, polycarbonate lenses for a wide field of vision, they also offer hydrophilic rubber temples and nose pads that grip better when wet for a comfortable fit that stays put.
Tifosi Optics Seek FC
$49.99
Seek out aerobic adventure in Tifosi's Seek FC sunglasses. These lightweight, full-coverage shades boast Tifosi's exceptionally tough Grilamid frames, while their open-frame design and large, impact-resistant, polycarbonate lenses offer a wide field of vision while protecting you from debris. And, you'll love the hydrophilic rubber nose pads and temples that adjust in all directions and grip better when wet for a custom fit that stays put.
Tifosi Optics Tyrant 2.0
$69.95 - $69.99
Slip on Tifosi's Tyrant 2.0 and release your inner rebel. These stylish, lightweight specs boast Tifosi's exceptionally tough Grilamid frames and include three sets of easily interchangeable lenses, so you can see clearly in any light condition. Their open-frame design and large, impact-resistant, polycarbonate lenses offer a wide field of vision and protect you from debris, while the lens vents ensure fog-free vision. And, you'll love the hydrophilic rubber temples and nose pads that adjust in all directions and grip better when wet for a comfortable fit that stays put.
Tifosi Optics Tyrant 2.0 Clarion
$79.99
Slip on Tifosi's Tyrant 2.0 Clarion glasses and release your inner rebel. These stylish, lightweight specs boast Tifosi's exceptionally tough Grilamid frames and stunning, distortion-free Clarion mirrored lenses that prevent water spots. Their open-frame design and large, impact-resistant, polycarbonate lenses offer a wide field of vision and protect you from debris, while the lens vents ensure fog-free vision. And, you'll love the hydrophilic rubber temples and nose pads that adjust in all directions and grip better when wet for a comfortable fit that stays put.
Tifosi Optics Wisp
$59.95
For smaller faces, Tifosi's Wisp sunglasses supply an open-frame design and a great fit for unobstructed vision and outstanding comfort. These sleek, lightweight shades boast Tifosi's exceptionally tough Grilamid frames and include three sets of easily interchangeable, impact-resistant, polycarbonate lenses, so you can see clearly in any light conditions. And, you'll love the hydrophilic rubber nose pads and adjustable temples that grip better when wet for a comfortable fit that stays put.
TRP Bleed Funnel
$12.99
Service your TRP brakes like a pro with our new Bleed Funnel. COMPATIBILITY CHART BRAKE MODEL COMPATIBILITY QUADIEM SERIES YES TRAIL SERIES YES SLATE SERIES NO* HYLEX SERIES YES HY/RD SERIES YES HYDRO TT YES DASH SERIES NO After feedback from our pro Athletes (and their mechanics) we have developed the TRP bleed funnel to simplify the bleed process. Take your service to the next level. *Slate uses a smaller bleed fitting. Funnel can be used with a slate Bleed fitting adapter
Surly Dirty Windows Patch
$4.00
It's a little cloth patch that you can patch stuff with, or sew on a hat, if you are so inclined. For bed or for the ride, it's the perfect accessory for the fashion conscious.
Surly Kickstand Plate
$15.00
Surly made these handy plates for use with either the Long Haul or Disc Trucker frames, and only the Long Haul and Disc Trucker frames. They are to be used with a bicycle kickstand to keep your bicycle upright while not moving as if by magic. The plates consist of two halves that, when clamped on your frame in conjunction with a kickstand, protect your chainstays from hamfisting by sandwiching the frame between the plates. Have you ever eaten a hamfist sandwich? They taste terrible, so avoid them like the plague. - Compatible with 2019 and older Long Haul and Disc Trucker frames
Surly Moloko Handlebar Bag
$68.00
The Moloko Adjunct Personal Effects Receptacle is made from urethane-coated nylon canvas and designed to fit in the center of the Surly Moloko Bar. It has space for essentials and can easily be accessed while riding. - Constructed from urethane-coated nylon canvas to provide water-resistant protection - Elastic cord on top snuggly secures extraneous loose items like wrappers or gloves - Integrated light port allows a battery cord to pass through - Dimensions: 254 x 90 x 90mm
Surly Snow Monkey Patch
$4.00
It's a little cloth patch that you can patch stuff with, or sew on a hat, if you are so inclined. For bed or for the ride, it's the perfect accessory for the fashion conscious.
Surly Stripes Patch
$4.00
It's a little cloth patch that you can patch stuff with, or sew on a hat, if you are so inclined. For bed or for the ride, it's the perfect accessory for the fashion conscious.
Sunlite Deluxe Child Carrier
$129.95 - $199.99
Make ride time family time with Sunlite's Deluxe Child Carrier. It attaches to a sturdy aluminum rack and cradles your most precious cargo with a durable, high-impact plastic structure. Your bundle of joy rides in complete comfort with a 3-point safety harness with protective chest pad, adjustable foot wells with straps, a grab bar with padded grips and a head rest. And it's got real-world details like 2 in-seat storage compartments and a washable, padded seat for junior.
Sunlite Deluxe Quick Release Basket w/Bracket
$47.99
- Mesh style design with a durable powder-coated finish - Fully adjustable aluminum and composite quick-release bracket - Handlebar mount is compatible with 22.2mm and 31.8mm handlebars
Sunlite Heavy Duty Adjustable Training Wheels (20-26 inch bicycles)
$109.95
Learning to ride safely is easy with Sunlite's Training Wheels. These wheels roll smoothly thanks to their heavy-duty steel construction with hard rubber tires. They fit bicycles with wheel sizes of 20 to 26 inches, and the height adjusts as the rider learns balance.
Sunlite Low Rider LED Bullet
$45.99 - $79.99
Modern lighting technology meets vintage style in Sunlite's Low Rider LED Bullet. The bullet shape hearkens back to the era of generator-powered headlights, but this modern torch features three LED lights to brighten your way through nighttime streets. It runs on two C-cell batteries (sold separately) for hours of use, and the two modes let you choose between a steady beam and a flashing beam. This light mounts easily on your fork or under your headset spacers to shed light on all your night time rides.
Sunlite Y-Socket Wrench
$14.95
Ask any shop wrench what their favorite, most-used tool is and they'll probably answer the 3-way. Sunlite's Y-Socket Wrench has 8, 9, and 10mm socket wrenches. The rubber handle lets you wrench all day in comfort, too.
Stan's No Tubes Dart Tool
$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
Smith Optics Attack
$249.00 - $259.00
The next generation in Smith performance eyewear has arrived. The Attack is faster in every detail. Experience the sound of speed with Smith MAG interchangeable technology; the lens change innovation that enables fast ChromaPop lens swapping for varying light conditions. Two ChromaPop lenses are included, and have been crafted with a lowered-brow design for increased ventilation. The Attack also features Smith's two-position nose piece that's engineered to give you a perfect fit and all day comfort. Megol temples ensure that your glasses are secure at your fastest velocity. - Extra ChromaPop Contrast Rose lens included
Skratch Labs Anytime Energy Bar
$2.65 - $31.80
Skratch Labs Anytime Energy Bar is made with real ingredients such as fruits, nuts and quinoa. It has enough fuel to power you through endurance workouts and is tasty enough to be used as a snack any time of day.
Skratch Labs Sport Crispy Rice Cake
$2.45 - $3.00
Skratch Labs Sport Crispy Rice Cake Treat yourself(!) to a Sport Crispy Rice Cake. It's made with a blend of puffed rices and toasted grains, giving you energy-packed complex carbohydrates that feel light and digest easily, all held together by fluffy, heavenly marshmallow. Each Sport Crispy Rice Cake gives you 180-190 calories, enough to extend most athletes' endurance efforts by an hour. Skratch Sport Crispy Rice Cakes are: - Light & Crispy: Easy to eat, easy to digest, and won't weigh you down - Made from Scratch: A blend of crispy brown rice, wild rice, red rice, and quinoa. Only real food and no junk! - On-the-Go Energy that Lasts: 180 kcals & over 20g of complex carbohydrates fuels most athletes for 1+ hours - Allergen-Friendly: Gluten Free, Peanut Free, Dairy Free, Soy Free - Non-GMO, Gelatin Free, No Artificial Colors or Flavors
Skratch Labs Sport Energy Chews
$2.45 - $24.50
Skratch Labs Sport Energy Chews are made with simple ingredients and flavored with only real fruit to create an energy chew with a clean bite that isn’t coated in wax. The result is a subtle taste that lets you fuel your active lifestyle with a functional food.
Skratch Labs Sport Hydration Drink Mix
$1.95 - $49.00
Our Sport Hydration Drink Mix was created for a simple purpose—to replace the electrolytes lost in sweat and to provide a little bit of energy when working out, without offending your palate or gut. We initially created this drink because some of the world's best athletes needed better. Conventional sports drinks made them sick. They were undrinkable—too sweet, over-flavored, and didn't even replace what was lost in sweat—which defeated the whole purpose, like fighting thirst with more thirst. The best athletes needed something to safely hydrate, something to quench their thirst, and something to help them perform better. So with their help, we reimagined sports drinks, stripping down what used to be a neon-colored carnival to its bare essentials. In the process, we learned that simple wasn't just better for elite athletes, it was better for everyone who works hard and sweats. The result is a sports drink with minimal sugar (4g per 100 ml) and a ratio of sugar (glucose + fructose) that is optimized for faster absorption, an electrolyte profile that actually matches what is lost in sweat (800 mg sodium, 80 mg potassium, 100 mg calcium, and 80 mg of magnesium per liter), and only real fruit for flavor for a light and refreshing taste that you can drink all day. That's it—less sugar, the right electrolyte profile, and real fruit. So, if you've never met a sports drink you wanted to take home, your luck is about to change. Drink when thirsty and leaking like a busted fire hydrant. Don't drink while deep in the middle of a Netflix marathon session or sending emails (unless, you're also on your trainer). Meaning, if you haven't earned it, you don't deserve it.
Silca Chisela Computer Mount
$125.00
Cutting edge aerodynamic and lightweight mount 3D Printed in Titanium compatible with all Garmin and Wahoo computers (except bolt v1). T-Tray mounting system makes for a removable mount for lights, cameras, and more! - Standard: 9 – 30mm - Wide: 23 – 40mm
Silca Italian Army Knife—Nove
$40.00
The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or MATTONE. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Nove (No-vay) 9 forged and plated tools: Hex 2/3/4/5/6/8 +Torx 25 +PH2/Flat - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - NOVE- 79 grams
Silca Italian Army Knife—VENTI
$55.00
The Italian Army Knife VENTI builds on the flat design, forged mid-length tools, and Stainless Steel hardware of our award-winning line of Italian Army Knives. Adding new tools including the most ergonomic and functional chain breaker ever featured in a portable multi-tool, the VENTI has everything you need. The unique magnetic slide-lock design of the VENTI chain-tool allows it to be more than twice as long as other designs for exceptional ergonomics in use, while also allowing it to be removed completely from the tool for improved functionality. The forged mid-length tools are long enough to reach all common cycling fasteners, but not so long that they twist or deform under load. The ergonomic side plates also hold a discreet magnetic storage feature for a spare master link and all tools are coated with SILCA's unique high-grip chrome plating which provides better torque transfer at the bolt interface. - Metal injection sidebars with knurled grip surface and stainless steel hardware - Forged chain breaker for 10-12 speed chain - Magnetic storage for 10-12 speed compatible chain connectors - Forged and plated tools: - Hex 2/2.5/3/4/5/6/8 - Torx 8/10/20/25 - PH2/SL4 - 7mm box wrench - 8mm flare nut wrench - 10mm open-end wrench - Disc pad spreader - Valve core remover - Spoke wrenches—13G / 15G - 172 grams
Silca Mattone Seat Pack
$50.00
Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm
Silca Pista Plus Floor Pump
$199.95
Pista Plus is a floor pump that's built to outlast the rest of your cycling equipment. The durable steel barrel, 3mm-thick leather plunger piston design, combined with our proprietary brass air bridge and check-valve assembly ensure unrivaled longevity. The smaller-diameter barrel matched with the superior pumping efficiency of our classic 28mm 731 model Italian leather piston gasket and self-lubricating linear bearings means that Pista Plus is capable of easily reaching pressures up to 220 PSI. Pista Plus features a three-footed aluminum base and a full-size lathe-turned ash handle. The chuck dock on Pista Plus secures the chuck at the Schrader chuck allowing the rider to swap the standard chuck out for our HIRO chuck or Disc Wheel Adapter while retaining the ability to secure the hose to the pump. The large 64mm gauge is accurate to 2% and features a high-contrast face design. - Durable, high-strength steel barrel - Full-size lathe-turned ash wood handle with hose guide - High-efficiency SILCA leather piston assembly - Brass air bridge and check-valve assembly - 2% Accurate, heavy-duty 2.5" (64mm) gauge rated to 220PSI - Integrated Schrader chuck plus press-on alloy Presta chuck with Bleeder valve
Silca Secret Chain Blend—Hot Melt Wax
$42.95
When we launched Secret Chain Lube, Josh admitted that the starting point for this product was a hot wax recipe he had used for years with pro teams that had won numerous world and Olympic medals. The idea behind Secret Chain Lube was to bring this technology to a lube that didn't require hot melting, but it turns out many of our customers were already big fans of hot waxing chains, and the requests flooded in for us to release the SILCA Secret Wax Blend...so here it is! Consisting of highly refined laboratory-grade paraffin and a high concentration of 3 specific sizes of nano-scale Tungsten disulfide, Secret Chain Blend not only acts as a lubricant but actually acts to modify the surface of the chain, filling in all of the crevices of the metal with highly lubricious and wear-resistant tungsten disulfide particles. As a result, chains waxed with Secret Chain Blend and Secret Chain Lube will actually get faster over time and after repeated waxings. Secret Chain Blend is the only hot wax lubricant to have a specifically matched and compatible drip wax that can be used to 'top off' the wax as needed, extending the duration between hot wax applications, and guaranteeing the quietest running drivetrain possible. Using the combination of Secret Chain Blend and Secret Chain Lube can dramatically extend the chain and drivetrain component life (up to 10x). - 500g / 17.6oz pouch - The chain should be VERY clean and dry before applying
Silca Super Secret Chain Lube
$25.00 - $55.00
SILCA Super Secret Chain lube started out as a project to develop the fastest hot-melt wax lubricant available more than a year ago. Josh has been recommending Hot Melt Wax and helping Pro cyclists and triathletes wax chains for years and wanted to bring his lubricant formula to our customers, the challenge was how to consistently melt, dip and agitate the chain across different crockpot designs and temperatures.  The project took a fascinating turn from the world of IndyCar when Josh was introduced to a group that had developed a technology to put micro-scale wax powders into a solution that was quick-drying and forms a coating that is indiscernible from hot melt dipping. The combination of air-drying liquid wax and Tungsten Disulfide would quickly prove to beat all currently available hot-melt waxes in friction testing while being much faster and easier to apply. Best of all perhaps is that this formula would prove to be very environmentally friendly, utilizing 4 different types of wax, nanoplatelets of WS2 (Tungsten Disulfide), and mild alcohol to act as a carrier. This same alcohol is used in the SILCA Gear Wipes, making them a perfect product to clean and remove Secret Chain Lube. - 4 oz. and 8 oz. bottles with the precision applicator tip for dripping on your chain, or 12oz lube (leaving room for your chain) for dipping the chain - The chain should be VERY clean and dry before applying - Apply according to video and let dry for AT LEAST 12 hours for optimal results, 24 hours if applied in cool or humid weather conditions! We recommend applying the lube AFTER your ride so it's ready for next time! - NOTE: Over time the WS2 will begin to settle to the bottom of the bottle, shake well before using!
Sigma Power Spoke Magnet
$7.69
Power Spoke magnet for all Sigma computers. Fits round and bladed spokes.
Sigma Wired universal computer mount
$13.19
Sigma's universal computer mount features a wired speed sensor, so you can use your Sigma cyclo-computer on a second bike. This kit comes with O-rings and a spoke magnet.
Serfas 16-Gram CO2 Threaded Cartridges
$3.00
These compact, threaded 16-gram cartridges work with compatible CO2 inflators and easily packs into your seat bag.
Saris 142x12 Trainer Thru Axle Adapter
$50.95
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts
Saris 20/24-inch Wheel Adapter
$69.99
The Saris 20/24-inch Wheel Adapter allows you to use your BMX or recumbent bike with your trainer.
Saris H3 Direct Drive Smart Trainer
$1,099.99
Reliable. Durable. Quieter Than Ever Before. When it comes to indoor bike trainers, the most frequently asked question is: how quiet is it? Taking this to heart, our Madison, Wisconsin-based team put this query under the microscope and set a goal to build a trainer so quiet, that the only sound is that of your drive train. The result? A direct drive smart trainer that touts a sound specification of 59 decibels at 20 mph. In other words, the H3 is five times quieter than previous generations, making it the quietest smart trainer to ever leave our doors. Following the Saris direct drive smart trainer legacy, the H3 features the same reliably and durability as its predecessors. Each H3 is made from cast and machined aluminum sourced from America’s heartland. Encased inside are components meticulously calibrated to measure power, speed and cadence, as well as a precision-balanced flywheel - all built to handle 2000 watts and replicate a 20% climbing grade. Tested to withstand heavy training, the H3’s internal cooling system will keep the electromagnetic resistance system working – and accurate – long after your legs have given out. - Quieter Than Ever: all new drive system shaves decibels off previous generations. - Precise Training: +/- 2% power accuracy. - Controlled and Consistent: electromagnetic resistance provides a measured workout every time. - Direct Drive Design: widest bike compatibility and eliminates wheel slips. - No External Sensors Required: measures speed, cadence and power. - Seamless Integration: connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth FTMS standards. - Zwift certified. Specs - Noise level: 59 decibels at 20 mph - Power measurement accuracy: +/- 2% - Maximum power output: 2000 watts at 20 mph - Simulates a 20% climbing grade - Fast response electromagnetic resistance - Measures speed, cadence and power – no external sensors needed - 20 lb precision balanced flywheel - Integrated dual ANT+ FE-C and Bluetooth FTMS standards - Built-in front wheel block - Integrated carrying handle - Compatible with Shimano 8-11 speed cassettes - XD/XDR freehubs sold separately (link) - Thru-axle compatible for bike frames with fork widths of 142 or 148. - Quick-release compatible for bike frames with fork widths of 130mm and 135 mm. - Compatible with a wide variety of devices and indoor cycling applications, including Rouvy, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2 (link). - LED indicator lights communicate connectivity and more. - Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear. - Internal cooling technology ensures accurate ride data even during the hardest of workouts. - Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage. - Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer. - Over the air (OTA) firmware updates and calibration via the Saris app (link to firmware page) - Maximum weight (rider and bike): 300 lbs. - Dimensions when Open L*H*W: 31x18.5x19.5 inches (787.4x469.9x495.3 mm). - Dimensions when Closed L*H*W: 8.5x18.5x19.5 inches (76.2x469.9x495.3 mm). - Weight: 47 lb. (21.3 kg). - Cassette sold separately.
Salsa EXP Series Direct Mount Thumb Screw
$10.95
The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two
Salsa EXP Series Rubber Straps
$18.99 - $20.95
The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs
SRAM Brake Lever Bearing Press
$27.00
Service all SRAM brake lever pivot bearings with this easy-to-use bearing press. Keep all of the SRAM brake pivots feeling snappy and ready to ride. Features - Easily replace or install pivot bearings in SRAM brake levers - For use with CODE RSC, X0 Trail, Level Ultimate, Guide Ultimate/RSC, G2 Ultimate
SKS Bluemels 75 U Fender Set
$87.95
Enjoy cycling in any weather. The Bluemels 75 U fenders cover tire widths up to 65mm. They use a proprietary construction with super-fine aluminum strips embedded in a matte black plastic coating, making these mudguards extremely durable and resistant to bending and UV damage. - Very wide profile for tires up to 65mm width - Proprietary construction embeds super-fine aluminum strips into matte black plastic coating - For 27.5 and 29-inch wheels - Includes accessory parts and stays - Weight: 800g
SKS P45 Chromoplastic Longboard
$56.99
End wet feet forever! SKS Longboard are one of the longest and best coverage fender on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety. - 700c x 28–37
RockShox Bleeding Edge Tool
$21.00
- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting
RockShox RockShox MTB Fender
$16.00 - $21.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
Robert Axle Project Trainer Thru Axle
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Rapha Explore Water Bottle
$12.00 - $16.00
A taste-free bottle with an ergonomic grip for on-the-bike hydration. Regular hydration is key on a ride of any length, particularly adventures into the unknown. Stylish and functional, the Rapha Brevet Bottle has been updated with a new shape and nozzle as well as the familiar Brevet bands. The main body of the bottle is made with a taste-free, BPA-free plastic that's 100% recyclable while the easy-to-open, leak-proof cap and squeezable body are both dishwasher safe. - Brevet bands - Taste-free plastic - BPA-free - 100% recyclable - Dishwasher safe - Easy-to-use, leak-proof cap - 625ml and 750ml sizes
Rapha Rapha Water Bottle
$12.00 - $17.00
A taste-free bottle with an ergonomic grip for on-the-bike hydration. Regular hydration is key on a ride of any length. Stylish and functional, the Rapha Classic Bottle has been updated with a new shape and nozzle. The main body of the bottle is made with a taste-free, BPA-free plastic that’s 100% recyclable while the easy-to-open, leak-proof cap and squeezable body are both dishwasher safe. - Rapha script logo - Taste-free plastic - BPA-free - 100% recyclable - Dishwasher safe - Easy-to-use, leak-proof cap - 625ml and 750ml sizes
Profile Design Universal Aerodrink Bracket
$14.99
The Universal Aerodrink Bracket fastens quickly and easily to your aerobar extensions using secure Velcro straps. It's compatible with Profile Design's Aerodrink, Insulated Aerodrink, and Aquacell systems (all sold separately).
Prestacycle Prestaflator Micro CO2 Bicycle Inflation Tool
$17.95
The new Standard in light, reliable inflation! Prestaflator Micro is a superlight CO2 inflation head and more! We've combined technologies to make a head 33% lighter than any other major brand, and provides secure, leak-free connection with the greatest possible inflation control! The Cartridge is the flow control Knob The best way to inflate CO2 is with a variable flow knob. The bigger the knob, the better the flow control. Prestacycle introduces it's revolutionary design – the Cartridge is the Knob! Save weight, size and complexity with our design. Secure, no-loss connection. Prestaflator Micro uses a threaded Presta / Schrader head. Secure attachment with a perfect seal insures you don't loose any CO2. 100% of the cartridge contents will go towards inflation Easy operation You can install the cartridge first, or put the head on the valve first. Prestaflator Micro works perfectly either way. When you screw the cartridge onto the head – NO CO2 will flow. There is no-loss from installing the cartridge. To inflate, Slightly un-screw the cartridge, and inflation begins. The more you unscrew, the faster it flows. Works great – even for seating tubeless tires. If you close the cartridge again, flow stops completely. If you leave the cartridge on, it will retain the contents for an extended period of time. Specifications: - 33% Lighter and smaller than any major brand - The Cartridge is the Knob! - Turn Cartridge (instead of a knob) for precise flow control - Secure Presta / Schrader Threaded head prevents loss - Only 12 grams weight! - Precision Machined alloy for long life - Compatible with CO2Pump for a 48 gram total Pump option! - Compatible with our Compressor Adapter for unlimited inflation!
Polar Bottles Breakaway Insulated 24oz Bolt
$17.00
When speed matters, our Breakaway Insulated Bolt bottle delivers a burst of cool hydration quickly. Just grab, squeeze, and drink up without splatter. Engineered to keep liquids cool to the last drop. As cycling enthusiasts, we know a thing or two about power sprints, brutal hills, and relishing the downhill ride. We also know there's nothing better than taking a big swig of cold water, hours after it's poured. So, we built the Breakaway Insulated bottle for road warriors like us—those who sweat hard, hydrate harder, and demand replenishment. Your liquids will stay cool twice as long, thanks to the Tri-Layer insulation and radiant heat reflective technology. Plus, we've re-engineered it to lighten your ride while still delivering simple hydration. The compact and durable design fits most bike cages and includes a high-flow, self-sealing Surge Cap for spill-proof transport. - The Breakaway Surge valve maximizes flow rate and self-seals to eliminate spills and splatter. It's spill-proof when open, and pushes closed for leak-proof transport. - The original, 100% BPA-free insulated water bottle. The updated design features triple wall insulation, keeping your liquid cooler 2X longer. - Our bottles are designed with ultra-light materials and a unique grip groove, so you can hydrate with an easy squeeze. - Made for cyclists by cyclists, the Breakaway series fits securely in a variety of bottle cages. The updated Polar Bottle shape has a unique grip groove and wall design for effortless hydration. - The innovative Surge Cap is two pieces–cap and valve–and easy to clean. Simply twist, pull, and wash. Plus, they're dishwasher safe. - Polar Bottle insulated water bottles are crafted in Colorado to reduce environmental impact and support local economies. Designed to last, each one of our water bottles comes with a lifetime guarantee. - Capacity: 0.71 L / 24 fl oz - Dimensions: 10.5 x 2.75 in. - Material: LDPE, TPU Valve - Weight: 150 g / 5.3 oz
Page 1 of 4 Next page