Handlebars

- Continuous carbon composite construction
- Aero-Ergo flat-top riser central section follows the natural arc of the arms with a 10-degree forward bend for more ergonomic climbing position and easier breathing
- Cable groove compatible with new Di2 systems w/ larger internal cable tunnel
- Reinforced and textured lever and stem clamping areas
- Bar width: center/center from the handlebar tails

For all the off-road drop bar fans, Velo Orange offers the Far Bar, an affordable off-road drop bar. With off-road drop bars, most riders have the bars set up at the same height as they would have flat bars set to. Most of the time you are riding, your hands are on the hoods of the brake levers. Then, for steep descents, put your butt back behind the saddle and use the drops to get a better grip on the brake levers. You can run brifters or standard road brake levers on them and use bar end shifters as well. The Daija Cycleworks crest appears on each side of the 31.8 mm clamp area. These bars are a little different then road bars in terms of measuring the width. The listed width - 44cm or 48 cm - is measured center of the drops to centre of the hoods. The overall width is 585mm for the 44cm size, 625mm for the 48cm size. - Weight: 292g - Drop: 110mm - Drop Bend Style: Compact - Reach: 76mm - Material: Aluminum - Bar Top Style: Round

Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too. The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy. Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.

Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.

Velo Orange's Tourist bar is a "North Road" style bar rendered in polished aluminum alloy. It's similar to the bars used on many classic British roadsters. The clamp area is 25.4mm in diameter. The width is 570mm and the reach is 180mm; it has about 70mm of rise. They sweep back about 60-degrees, and the grip area is about 160mm long. The Tourist accepts regular MTB (22.2mm) grips, brakes, and shifters, but not inverse levers or bar-end shifters.

Atmos is our new premium offering for cross-country performance. The Atmos 7k flat bar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 30mm per side allowing you to customize the bar to your preferred width. This bar is made of lightweight 7050 aluminum. - 760mm width - 250g at full width - 7050 aluminum - Wide to start and trimmable by 30mm each side SPECIFICATIONS - Type: Flat - Application: XC - Clamp Diameter: 31.8mm - Backsweep (degrees): 9

The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

Atmos is our new premium offering for cross-country performance. The Atmos carbon flat bar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 40mm per side allowing you to customize the bar to your preferred width. This is the lightest bar in the Atmos range. - Wide to start and trimmable by 40mm each side - Specialty tuned carbon laminate to absorb noise while maintaining stiffness - 190g at full width SPECIFICATIONS - Type: Flat - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface. - Upsweep: 5° - Backsweep: 9° (760mm bars) - Backsweep: 7° (all other bars)

Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black

Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black

Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum

Genuine replacement parts

Achieve your ultimate aerodynamic goals.

Features
- Bar only. Extensions, arm pads and hardware not included
- Accessories are available separately
- UCI legal

For optimal aerodynamic position. - Only compatible with Speed Concept - UCI legal

Genuine replacement parts Customize your bike with a new handlebar that fits your own personal style. Product details - Traditional 20 degree back sweep handlebar - 6061-T6 polished aluminum with anodize finish - RIDE+ versions have an integrated cable guide inside

Positioned for power

The Trek Aero RSL Road Integrated Handlebar/Stem is built upon our Race Fit, with a shorter reach and hoods that are 3cm narrower than the drops. This moves you into a more comfortable ergonomic riding position that greatly reduces rider drag for an extra aerodynamic advantage.

A 6-degree flare allows for ample wrist clearance and control, so you don't lose any power or comfort in explosive sprinting moments. Plus, riders get the weight-saving and aerodynamic advantage of a single-piece bar combined with stem.

Product details
- OCLV Carbon construction is ultra-light, compliant, and durable
- 7-degrees of ergonomic backsweep reduces rider drag for extra aerodynamic speed and comfort
- Hoods measure 3cm narrower than drops
- 6-degree flare provides ample wrist clearance for sprinting
- Aero RSL Pro Blendr mount and Barstem Top Cover sold separately
- Electronic shift compatibility only
- Compatible with Madone Gen 8, Checkmate SLR, & Checkpoint SL Gen 3 (requires additional parts)
- Race Fit puts riders into a more comfortable, ergonomic riding position

Positioned for power

The Trek Aero RSL Road Integrated Handlebar/Stem is built upon our Race Fit, with a shorter reach and hoods that are 3cm narrower than the drops. This moves you into a more comfortable ergonomic riding position that greatly reduces rider drag for an extra aerodynamic advantage.

A 6-degree flare allows for ample wrist clearance and control, so you don't lose any power or comfort in explosive sprinting moments. Plus, riders get the weight-saving and aerodynamic advantage of a single-piece bar combined with stem.

Product details
- OCLV Carbon construction is ultra-light, compliant, and durable
- 7-degrees of ergonomic backsweep reduces rider drag for extra aerodynamic speed and comfort
- Hoods measure 3cm narrower than drops
- 6-degree flare provides ample wrist clearance for sprinting
- Aero RSL Pro Blendr mount and Barstem Top Cover sold separately
- Electronic shift compatibility only
- Compatible with Madone Gen 8, Checkmate SLR, & Checkpoint SL Gen 3 (requires additional parts)

Positioned for power

The Trek Aero RSL Road Integrated Handlebar/Stem is built upon our Race Fit, with a shorter reach and hoods that are 3cm narrower than the drops. This moves you into a more comfortable ergonomic riding position that greatly reduces rider drag for an extra aerodynamic advantage.

A 6-degree flare allows for ample wrist clearance and control, so you don't lose any power or comfort in explosive sprinting moments. Plus, riders get the weight-saving and aerodynamic advantage of a single-piece bar combined with stem.

Product details
- OCLV Carbon construction is ultra-light, compliant, and durable
- 7-degrees of ergonomic backsweep reduces rider drag for extra aerodynamic speed and comfort
- Hoods measure 3cm narrower than drops
- 6-degree flare provides ample wrist clearance for sprinting
- Aero RSL Pro Blendr mount and Barstem Top Cover sold separately
- Electronic shift compatibility only
- Compatible with Madone Gen 8, Checkmate SLR, & Checkpoint SL Gen 3 (requires additional parts)

Positioned for power

The Trek Aero RSL Road Integrated Handlebar/Stem is built upon our Race Fit, with a shorter reach and hoods that are 3cm narrower than the drops. This moves you into a more comfortable ergonomic riding position that greatly reduces rider drag for an extra aerodynamic advantage.

A 6-degree flare allows for ample wrist clearance and control, so you don't lose any power or comfort in explosive sprinting moments. Plus, riders get the weight-saving and aerodynamic advantage of a single-piece bar combined with stem.

Product details
- OCLV Carbon construction is ultra-light, compliant, and durable
- 7-degrees of ergonomic backsweep reduces rider drag for extra aerodynamic speed and comfort
- Hoods measure 3cm narrower than drops
- 6-degree flare provides ample wrist clearance for sprinting
- Aero RSL Pro Blendr mount and Barstem Top Cover sold separately
- Electronic shift compatibility only
- Compatible with Madone Gen 8, Checkmate SLR, & Checkpoint SL Gen 3 (requires additional parts)

Positioned for power

The Trek Aero RSL Road Integrated Handlebar/Stem is built upon our Race Fit, with a shorter reach and hoods that are 3cm narrower than the drops. This moves you into a more comfortable ergonomic riding position that greatly reduces rider drag for an extra aerodynamic advantage.

A 6-degree flare allows for ample wrist clearance and control, so you don't lose any power or comfort in explosive sprinting moments. Plus, riders get the weight-saving and aerodynamic advantage of a single-piece bar combined with stem.

Product details
- OCLV Carbon construction is ultra-light, compliant, and durable
- 7-degrees of ergonomic backsweep reduces rider drag for extra aerodynamic speed and comfort
- Hoods measure 3cm narrower than drops
- 6-degree flare provides ample wrist clearance for sprinting
- Aero RSL Pro Blendr mount and Barstem Top Cover sold separately
- Electronic shift compatibility only
- Compatible with Madone Gen 8, Checkmate SLR, & Checkpoint SL Gen 3 (requires additional parts)

Positioned for power

The Trek Aero RSL Road Integrated Handlebar/Stem is built upon our Race Fit, with a shorter reach and hoods that are 3cm narrower than the drops. This moves you into a more comfortable ergonomic riding position that greatly reduces rider drag for an extra aerodynamic advantage.

A 6-degree flare allows for ample wrist clearance and control, so you don't lose any power or comfort in explosive sprinting moments. Plus, riders get the weight-saving and aerodynamic advantage of a single-piece bar combined with stem.

Product details
- OCLV Carbon construction is ultra-light, compliant, and durable
- 7-degrees of ergonomic backsweep reduces rider drag for extra aerodynamic speed and comfort
- Hoods measure 3cm narrower than drops
- 6-degree flare provides ample wrist clearance for sprinting
- Aero RSL Pro Blendr mount and Barstem Top Cover sold separately
- Electronic shift compatibility only
- Compatible with Madone Gen 8, Checkmate SLR, & Checkpoint SL Gen 3 (requires additional parts)

Positioned for power

The Trek Aero RSL Road Integrated Handlebar/Stem is built upon our Race Fit, with a shorter reach and hoods that are 3cm narrower than the drops. This moves you into a more comfortable ergonomic riding position that greatly reduces rider drag for an extra aerodynamic advantage.

A 6-degree flare allows for ample wrist clearance and control, so you don't lose any power or comfort in explosive sprinting moments. Plus, riders get the weight-saving and aerodynamic advantage of a single-piece bar combined with stem.

Product details
- OCLV Carbon construction is ultra-light, compliant, and durable
- 7-degrees of ergonomic backsweep reduces rider drag for extra aerodynamic speed and comfort
- Hoods measure 3cm narrower than drops
- 6-degree flare provides ample wrist clearance for sprinting
- Aero RSL Pro Blendr mount and Barstem Top Cover sold separately
- Electronic shift compatibility only
- Compatible with Madone Gen 8, Checkmate SLR, & Checkpoint SL Gen 3 (requires additional parts)

Genuine replacement parts For OE replacement only. Product details - Mounting hardware included - Can be cut down for narrower width

Original equipment replacement parts for your ride.

GENUINE REPLACEMENT PARTS
Dialed for the ultimate comfort fit.

PRODUCT DETAILS
- Durable and light weight aluminum construction
- Upright posture positioning

Genuine replacement parts

Features KVF shaping and integrated design for unbelievable aerodynamics and stiffness.

Features
- Not compatible with other bikes
- Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops
- 100% OCLV carbon fiber construction
- Seamless integration with Blendr accessory bases and mounts, sold separately

Original equipment integrated handlebar for Trek Madone SLR bikes. Genuine replacement parts Features KVF shaping and integrated design for unbelievable aerodynamics and stiffness. Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops. PRODUCT DETAILS - Not compatible with other bikes - 100% OCLV carbon fiber construction - Seamless integration with Blendr accessory bases and mounts, sold separately - For installation instructions, please see the Madone Assembly Manual - Go green and save green - Zero packaging means zero waste & zero extra cost

Genuine replacement parts

Features KVF shaping and integrated design for unbelievable aerodynamics and stiffness.

Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops.

Features
- Not compatible with other bikes
- 100% OCLV carbon fiber construction
- Seamless integration with Blendr accessory bases and mounts, sold separately
- For installation instructions, please see the Madone Assembly Manual

Get back on the road with genuine replacement parts.

- Includes hardware and covers to allow for flush cut or exposed steerer
- 3cm narrower at the hoods than in the drops
- For optimal aerodynamic benefit
- Only compatible with the Madone Gen 7

What if every hand position on your drop bars was actually comfortable? Our Feldspar Carbon flat-top gravel drop bar is designed to give you a natural, comfortable hand position anywhere on the bar. Its flattened top section, progressive flare, and carbon fiber construction combine for compliance and confidence on mixed terrain. We think these are the most comfortable drop bars out there for getting out there. Key Features - Unidirectional carbon fiber construction - Flattened top section for a comfortable grip and compliance on rough roads - Multi-stage flare: 12 degrees at the hoods for comfort, 20 degrees at the drops for maximum control - Reinforced clamping zones to ensure compatibility with all of your favorite drop bar controls - 68mm reach, 100mm drop - Tested to our rigorous MTN Drop Bar standard — suitable for singletrack detours